MAX9610 高精度電流檢測放大器、1µA、µDFN/SC70封裝、用于鋰離子電池   MAX9610 概述   The MAX9610 high-side current-sense amplifier offers precision accuracy specifications of V_OS less than 500µV (max) and gain error less than 0.5% (max). This device features an ultra-low 1µA quiescent supply current. The MAX9610 fits in a tiny, 1mm x 1.5mm µDFN package or a 5-pin SC70 package, making this part ideal for applications in notebook computers, cell phones, cameras, PDAs, and all lithium ion battery-operated portable devices where accuracy, low quiescent current, and small size are critical.

The MAX9610 features an input voltage range (common mode) from 1.6V to 5.5V. This input range is excellent for monitoring the current of a single-cell, lithium-ion battery (Li+), which at full charge is 4.2V, typically 3.6V in normal use, and less than 2.9V when ready to be recharged. These current-sense amplifiers have a voltage output and are offered in three gain versions: 25V/V (MAX9610T), 50V/V (MAX9610F), and 100V/V (MAX9610H).

The three gain versions offer flexibility in the choice of the external current-sense resistor. The very low 500µV (max) input offset voltage allows small 25mV to 50mV full-scale V_SENSE voltage for very low voltage drop at full-load current measurement.

The MAX9610 is offered in tiny 6-pin µDFN, (1mm x 1.5mm x 0.8mm footprint) and 5-pin SC70 packages, specified for operation over the -40°C to +85°C temperature range.

For a very similar 1.6V to 28V input voltage device in a 4-bump UCSP™ package (1mm x 1mm x 0.6mm), refer to the MAX9938 data sheet.

MAX9610 pdf datasheet

  MAX9610 關鍵特性  

Ultra-Low Supply Current of 1µA (max)

Low 500µV (max) Input Offset Voltage

Low < 0.5% (max) Gain Error

Input Common Mode: +1.6V to +5.5V

Voltage Output

Three Gain Versions Available

• 25V/V (MAX9610T)
• 50V/V (MAX9610F)
• 100V/V (MAX9610H)

Tiny µDFN (1mm x 1.5mm x 0.8mm) and SC70 Packages

MAX9610 應用

	3.3V和5V電源管理系統
	照相機
	蜂窩電話
	PDA
	便攜式Li+電池供電系統
	USB端口 MAX9610應用電路