MAX8922L 30V Li+電池線性充電器，提供GSM測試模式

概述

The MAX8922L linear battery charger safely charges a single-cell lithium-ion (Li+) battery. Charging rate is optimized to accommodate the thermal characteristics of a given application. There is no need to reduce the maximum charge current at the worst-case charger power dissipation. Charging is optimized for a single Li+ cell using a control algorithm that includes low-battery precharging, voltage and current-limited fast charging, and top-off charging, while continuously monitoring for input overvoltage and device die-temperature conditions. The fast-charge current and top-off current thresholds are programmable by a simple 1-Wire? serial interface. The charger status and valid input power are indicated by two open-drain outputs (active-low CHG and active-low POK).

The fast-charge current is defaulted to 400mA and programmable through the 1-Wire interface (active-low EN/SET). The MAX8922L also can be programmable to GSM test mode through the 1-Wire interface.

The MAX8922L is available in a tiny (3mm x 2mm x 0.8mm) 10-pin TDFN package.

關(guān)鍵特性